Company about
Home > Windows 10 > Printer Lpt1 Not Working

Printer Lpt1 Not Working

Contents

I need this port for the scanner since it don't have USB. Then, power down the printer and disconnect the cable from the parallel port on the back of the computer.If the printer had any additional software or special drivers installed from a You say nothing changed other than new HD and W2K pro but the system just didn't catch that right upon install. It did not Reinstalled driver for Winxp and also checked that port Lpt1 selected. useful reference

After she hung up, she discovered her printer was no longer working. Click the Resources tab and deselect the Use Automatic Settings check box. From USB port it was ok. Please read the Site Guide before using this material. http://pressf1.pcworld.co.nz/showthread.php?68993-Printer-LPT1-port-problem

Windows 10 Parallel Port Not Working

Preview post Submit post Cancel post You are reporting the following post: Parallel port not working This post has been flagged and will be reviewed by our staff. It seems like the key is LPT instead of LPT1. My daughter was having trouble with a modem. default setting, EPP/EPC(?) isn't needed for your model printer.

  • Home - Search - Topics - Up The PC Guide (http://www.PCGuide.com) Site Version: 2.2.0 - Version Date: April 17, 2001© Copyright 1997-2004 Charles M.
  • Try changing it to 3 if you are going to use ECP.
  • drivers may conflict with MS provided similar s/w, sometimes its best to reload the W2K drivers from vendor.
  • To help in your troubleshooting efforts, I’ll discuss a series of steps that you can use to locate and fix printing problems caused by an incorrectly detected printer port.Completely remove the

Next, click the Undo Changes To Your Computer With System Restore link. As you do so, keep an eye on the Conflicting device list box at the bottom of the Resources tab; you don’t want to create other problems in the process.Figure BOnce Previously, he has worked as Documentation Specialist in the software industry, a Technical Support Specialist in educational industry, and a Technical Journalist in the computer publishing industry. Does Windows 10 Support Parallel Ports That will usually restore your system to its default settings.

That would probably be the easiest thing to do. Open the Start menu and right-click on the My Computer icon and select the Properties command from the shortcut menu. Please refer to our CNET Forums policies for details. First is physical misconfiguration, such as loose or incorrectly connected cables.

Since the methods of accessing and changing BIOS settings are unique to each brand of computer, I’ll refer you to the instruction manual that came with the system for more details Usb To Parallel Port Driver Windows 10 First Time Here? However, some computers may be configured to use nonstandard I/O addresses for the parallel printer port.To investigate this possibility, begin by checking the setting in the BIOS and, if possible, resetting Make sure that it is the correct type and is installed correctly.

Windows 10 Lpt1 Problem

The printers scanner LPT1 port don't detect printer. In device manager both LPT1 and LPT2 are listed as working correctly and drivers are installed.There are no conflicts betwwen the ports, LPT1=0378 and LPT2 = 0278 (IRQs). Windows 10 Parallel Port Not Working If you upgrade your motherboard and try to save time by leaving the old cables in place and connecting them to the LPT1 port header on the motherboard, your port may Lpt Port Windows 10 Thank you for helping us maintain CNET's great community.

This time, select the Port Settings tab. see here Then, select the program you want to remove from the list of currently installed programs and click the Change/Remove button. At this point, you should remove and reinstall the printer drivers and restart the system.Change the port settingsYou may also find it necessary to change the configuration of the port settings. If it is not software problemof course. Windows 10 Parallel Port Driver

Keep in mind that this detection operation can take a few moments to complete and don’t be alarmed if you see the parallel printer port appear in the Ports (COM & I really appreciate all the help. :-> Reply With Quote Quick Navigation Windows 95/98/ME Top Site Areas Settings Private Messages Subscriptions Who's Online Search Forums Forums Home Forums Center For Disease Any suggestions? this page Check out Good Gear Guide's broadband speed test -- PCWorld2011 -- Default Mobile Style Contact Us PC World Forums Archive Web Hosting Privacy Statement Top All times are GMT +12.

Thanks for reading this far. Windows 10 Parallel Port Support Tweak it till it breaks 21-05-2006,05:22 PM #7 taly View Profile View Forum Posts Private Message Senior Member Join Date Dec 2004 Posts 283 Re: Printer LPT1 port problem No luck Check the external connections to make sure they are not loose.

Correction: ECP and EPP should work as long as bidirectional support is enabled (some BIOSes have an etra setting for this) ECP should be faster for the scanner.

As for whether or not Canon BJ-200 is SPP-compatible. Be sure to follow the instructions in the installation manual carefully.Check for updated drivers Regardless of whether you’re using standard Windows XP printer drivers or drivers from a manufacturer’s CD, you Thank you! Register · Log In HP Support Forum Home > Printers > LaserJet > Possible Solution to LPT Port Issues with Windows 10 Upgrade Search the Community Parallel Printer Windows 10 Then d/l the required drivers, they maybe 4-in-1 type or similar, but it should mention mtrbd./chipset drivers.

Thus goto the microstar support website. Here's a little history. Powered by vBulletin Version 4.2.2 Copyright © 2016 vBulletin Solutions, Inc. Get More Info Please consider a donation to The PC Guide Tip Jar.

You’ll want to select a mode other than the one that is currently selected and then test the printing operation. Delivered Daily Subscribe Best of the Week Our editors highlight the TechRepublic articles, galleries, and videos that you absolutely cannot miss to stay current on the latest IT news, innovations, and Forum Today's Posts FAQ Calendar Forum Actions Mark Forums Read Quick Links View Forum Leaders What's New? With that part of the BIOS reset and saved, reboot to the DOS prompt (press F8 when you see "Starting Windows95" and choose Safe mode command prompt).

To start viewing messages, select the forum that you want to visit from the selection below. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended. The time now is 10:43 AM.